About

the thickness of the shear plate is 20mm, the capacity of the rolled plate: the thickness of the hot rolled plate is 120mm, the thickness of the cold rolled plate is 90mm, the maximum diameter of the machine is 2 meters, the longest length is 5mm, the maximum diameter of the drilled holes is 80mm, the electrically heated heat-treating furnace is 3.5*3.5*10 meters. After years of continuous development, the company has obtained the special equipment design license and special equipment manufacturing license issued by the General Administration of Quality Supervision and Inspection and set up a design and development department, so that the company has formed a complete system since the scientific research to the design, manufacturing as a whole.

The company specializes in manufacturing various specifications of magnetic coupling stirring high-pressure-reaction kettle/polymerization kettle/hydrogenation kettle/distillation kettle/autoclave, and its supporting pressure tanks, condensers, towers, etc., and its structural form, high and middle school, low pressure, heating, stirring, speed changes can be selected according to the standard or according to the user's process requirements for customization. The products are widely used in petrochemical, dyestuff, mining metallurgy, national defense science and technology, pharmaceutical intermediates, catalytic hydrogenation, chemical hydrogenation, fine chemicals and other fields. The reaction kettle and configuration are made of various grades of stainless steel, duplex steel, titanium, titanium alloy, nickel-copper alloy, Hastelloy, Inconel, zirconium, tantalum, PTFE lining and composite plates made of its materials.

Strictly in accordance with national regulations, standards for design, manufacturing, reasonable design of the kettle, coil, jacket and accessories specifications size, orientation, spacing, disturbance, infusion system, so that the heat transfer source flow faster, smoother, and the heat exchange source is fully in contact with the heat exchange, to achieve a better effect of heat transfer, greatly shorten the heat transfer time and save energy.

After years of research and development of stirring technology and thousands of sets of stirring devices, the company has successfully mastered the manufacturing technology of magnetic coupling stirrer and mechanical seal stirrer. According to different material viscosity and process characteristics (liquid-liquid, gas-liquid, solid-liquid, gas-liquid-solid, etc. homogeneous, non-homogeneous), we can choose to equip different types of stirring paddles (propulsion-type open turbine disc turbine frame-type anchor-type spiral belt-type three-bladed swept back self-absorption), and reasonably select motors, reducers, etc. We have professional dynamic balancing instrument of the stirring system.

There is a professional stirring system dynamic balancing instrument, which can carry out overall dynamic balancing measurement of stirring shaft and paddle, ensuring the balance of the shaft and paddle, and improving the service life of the transmission part of the reactor.

The company set up a welding laboratory with two welding engineers, new materials, new welding methods for process evaluation, has evaluated 102 items. We have mastered the welding technology of alloy steel, chrome-molybdenum steel, duplex steel, titanium and titanium alloy, nickel and nickel alloy, zirconium, tantalum and other metals. Holding pressure vessel welder's license personnel 22/93 items, various types of welding machines are selected from domestic well-known brand welding machine Huayuan, a total of 35 sets. Strengthen the skills training of welders and the development of incentives, rewards and penalties system, welding quality is stable, weld film a pass rate has always been maintained at more than 98%.

We have 2 heat treatment furnaces, one of which is a high-temperature and high-precision heat treatment simulation furnace, providing detailed parameters for heat treatment of various materials. The other one is 3.5*3.5*10m desktop electrically heated heat treatment furnace, the heat treatment temperature can be as high as 1100 ℃, equipped with temperature control can be recorded multi-point recorder, the temperature of heating, holding, cooling temperature and time to accurately control the temperature and each temperature measurement point for the whole process of recording. It can meet the requirements of restoring mechanical properties of container and post-weld heat treatment.

The company has a group of technicians and management personnel specializing in equipment design, development and production. We have established a relatively perfect production process and quality management system. The company has attracted a large number of customers by virtue of strong technical force, accurate testing methods, high quality products, perfect after-sales service, reputation, and to meet the needs of the majority of customers. We can develop and produce according to the different requirements of customers, to develop the market and meet the requirements of customers is the goal we strive for.

Over the years, Xintai has won many honors by virtue of its own comprehensive advantages. We warmly welcome new and old customers to visit us and negotiate business!